thetazzbot
thetazzbot
Ok I should have done this before i posted, but I see it now. Through the magic of the bit shifting. This piece shifts the bits far enough to the...
Yeah, I saw the bit table for m_infos and thought that was mighty clever! Bit shifting has been my week spot for a while...so I had to sketch it out...
Btw do you mind if I port this over to mbed? I'm using that chip on a Nucleo board and the library that is on mbed tagged with AT5DB04D actually...
Did you get a fresh copy? I just compiled it yesterday. I uploaded my local changes to github. Apparently I fixed a lot of things and forgot to upload it....
There was code for the personal but it conflicted so i rolled it back. Its the dials and lcd that are way different. I don't have a personal one so...
Sorry I can't help much with this one. I have not flashed mine in ages. Probably should dust it off and play with it for a bit and update the...
No i didn't notice that. I have not touch this project in ages but i might explore it again soon. I would probably replace the board with a cheap board...
Yes, the ISP header is the default method, exposed via the connector on the front of the machine. It is documented somewhere :) On my website I believe this article...
I'm not familiar with avr dude, but my steps for the Atmel studio are: Configure the Tool Connect Read device I'd Go to memories, program device On Thu, Apr 4,...
I'm using an AVR Dragon, in ISP mode, but any ISP programmer will suffice On Fri, Apr 5, 2019 at 4:16 PM TrendMend wrote: > Thanks, what programmer do you...