Bart Lauret

I have upgraded to 2.3.2 just a minute ago. I will post an update when the temperature becomes stuck again or when everything is fine. Regarding you second question: the...

Unfortunately the upgrade did not fix the issue:  Also on the add-on itho status page the stuck temp value is visible: ![Schermafdruk van 2021-12-03...

Here are the contents of config.json. Essentially a stock config with enabled MQTT. ``` {"sys_username":"admin","sys_password":"admin","syssec_web":0,"syssec_api":0,"syssec_edit":0,"api_normalize":0,"syssht30":0,"itho_rf_support":0,"rfInitOK":false,"itho_fallback":20,"itho_low":20,"itho_medium":120,"itho_high":220,"itho_timer1":10,"itho_timer2":20,"itho_timer3":30,"itho_updatefreq":5,"itho_sendjoin":0,"itho_forcemedium":0,"itho_vremoteapi":0,"nonQ_cmd_clearsQ":1,"mqtt_active":1,"mqtt_serverName":"************","mqtt_username":"************","mqtt_password":"*********","mqtt_port":1883,"mqtt_version":1,"mqtt_state_topic":"itho/state","mqtt_ithostatus_topic":"itho/ithostatus","mqtt_remotesinfo_topic":"itho/remotesinfo","mqtt_lastcmd_topic":"itho/lastcmd","mqtt_state_retain":"yes","mqtt_cmd_topic":"itho/cmd","mqtt_lwt_topic":"itho/lwt","mqtt_domoticz_active":0,"mqtt_ha_active":1,"mqtt_ha_topic":"homeassistant","mqtt_idx":1,"sensor_idx":1,"version_of_program":"005"} ``` The result of "Query status": ``` Result: 80 82 A4 01 01 17 02...

Yes, the temp is still stuck, I haven't rebooted since this morning. Devicetype: ``` Result: 80 82 90 E0 01 25 00 01 00 1B 2E 19 01 FE FF...

And now the temp isn't stuck anymore! Since the "query devicetype" and "query status format" the temp is the correct reading! I'm not sure which one of the queries did...

Thanks, will do

Unfortunately the temperature reading just got stuck again. On the itho settings page I see the following: ``` Itho device type: CVE-Silent Itho fw version: 25 ``` Something I noticed:...

Itho status page when temp is stuck: Label | Value -- | -- temp | 16.9 hum | 53.2 ppmw | 6395 Speed status | 2 Internal fault | 0...

Any further ideas how to debug this?

Yes, humidity has never been stuck. Thanks for your work and your help by the way!