terrafirma2021

HI, any ideas on where to find PIDS ? I have a yamaha xt660x 2008 There are lots of us who would like to attempt this, but we are stuck,...

I can enter Diag mode on the Dash, and cycle though the diag numbers to know what each diag is and its value, Would that be of use ?

Thank you for the prompt reply. Google yields no results I will try to source this info out, because prior to 2017 ODB 2 YDS plugs didnt exist, thus the...

@tmargot tmargot Thanks for the reply, glad to see you are also active here, I have also managed to bench flash the ecu, using an lone elec usb to Yamaha...

HI @tmargot @aster94 if you look on my GitHub I have solved the YDS I found another fork of a yamaha Datalogger from AVR to rasp pi The photo example...

Engine Running 1st Byte is Request 0x01 2nd byte is RPM (value * 50) 3rd Byte is Velocity 4th Byte is Error code 5th Byte is Coolent Temp 6th Byte...

@aster94 im not done yet, i am going to buy another KKL cable so i can work out who is sending. I managed to get into the DIAG Menu and...

Hi, can confirm that waveshare state to use on the IDE esp32s3.name=ESP32S3 Dev Module ( this is a generic board from what i understand, looking at the board info ...

@coryking Sorry i never reached back to you sooner, i decided to give the board another test on PIO. https://www.waveshare.com/esp32-s3-zero.htm You were spot on, thanks for replying, hopefully staff may...

https://theitbros.com/convert-windows-esd-file-to-windows-wim-file/ To add, I followed this guide to others who want to use other builds of win 10 that use the ESD format. Hopefully James can add in the extra...