susisstrolch

Same problem here - with an OE5RC3... Old CBi4pro (Feb '14) - approx 33° when viewing HD content New CBi4pro (Dec '14) - approx 64° - same content. Seems we...

Both CBis are purchased ones... Just did some testing: Idling OE5RC5, HDMI, 1920x1080, 50Hz old: core: 44°, case: 34°, clock 396000 new: core: 64°, case: 42°, clock 396000 case measured...

Yes, thats the real temp diff. Checked twice... Calibration data is identical on both boxes: CuBox-i4pro:~ # devmem 0x21bc4e0 32 0x5624D869 Cubox-I4:~ # ./devmem 0x21bc4e0 32 0x5694D969 On 12/22/2014 03:50...

Ooops - sloppy pattern matching w/o glasses... With KODI stopped I get the following values: CBi Old: 25,00°C @396MHz, i.MX6Q, silicon rev 1.2 CBi New: 40,68°C @396MHz, i.MX6Q, silicon rev...

Uuups... strolch@strolch:~/Development/OpenELEC/tools/mkpg/linux-imx_3.14.x.git> git revert 2b1601b error: could not revert 2b1601b... thermal: imx: update formula for thermal sensor hint: after resolving the conflicts, mark the corrected paths hint: with 'git add...

Not necessary - fixed - only comments are affected...

Same as before with slightly different values... Old: 25,0° / 34,6°C (no KODI / KODI sitting in OSD) New: 40,6° / 50,8°C So it would be really interesting to see...

Here are the raw ones:S Old: 44°C - 0x4e954106 -> 65 New: 60°C - 0x4ef52906 -> 41 HBi2ex: 33° - 0x51657806 -> 120 Sure about the 0x20c8180? On 12/23/2014 11:59...

I've never got tftp working inside a telnet session. Last famous words: "Committing update in 2 seconds" Did reset 1-5min after the commit message, but only got trash on serial...

I know that progress bar isn't possible because of blocked wdog and INTs. So a short "Starting commit, rebooting in XXX sec" would be sufficient via telnet. On 03/24/2015 07:10...