Rowland

docs: recent superslicer can visualise G2/G3

1

Recent superslicer can visualise G2/G3 moves, update readme.md to reflect this. https://github.com/supermerill/SuperSlicer/issues/1456 https://github.com/supermerill/SuperSlicer/releases/tag/2.3.57.0 Update readme.md

Version 2.1.31 Expected behaviour: Button for 'clean' should always be available Observed behaviour: Clean not available until after a build Impact Build fails, or worse, build succeeds but resultant firmware...

Add a stealthburner toolhead for creality e3 hotend.

19

* [ ] The mod, firmware configuration or slicer profile is in the correct category folder. Printable mods go to `printer_mods/`, firmware configurations go to `firmware_configurations/`, slicer profiles go to...

I've got a prusa that's typical and and a switchwire that's fast. Running your tower with an acceleration of 4000 which is about the limit of my bed with input...

Multiple Build plates

9

I work on big projects where all the parts never fit on the build plate, keeping track of waht I've printed and need to print means splititng the project over...

flow doesn't reset if temperature step is zero

5

I think this is a docs issue, and its actually a feature I like. If is set a temperature offset of zero, it just carries on the next row, this...

Page 7 of manual uses the definition of BHCS for a washer. > WASHER > Metric fastener with a domed shape head and hex drive. Most commonly found in locations...

MJPEG is slow, suggest YUYV in docs/config

8

### Is your feature request related to a problem? Please describe Some webcams are painful slow, crowsnest is brilliant for pi cam and on raspberry pi hardware. On other platforms...

Sonar uses template config

7

### What happened Sonar is not starting, config in printer_data/config says enable: true Sonar is using config file in printer_data/templte_config I had to edit printer_data/systemd/sonar.env to set sonar to use...

The docs aren't particularly clear that if you generate a mesh you can just use it without additional commands, for example in `START_PRINT` or equivalent slicer gcode. This is causing...