sthetix
sthetix
You can watch how i installed it on this video : ***@***.***:9/implementing-the-oled-chip-on-lite:f On Tue, 5 Jul 2022 at 22:15, alUN0 ***@***.***> wrote: > Hello all, > > Does anyone have...
this one : ***@***.***:9/how-to-solder-correctly:1 it's an old video On Wed, 6 Jul 2022 at 18:33, alUN0 ***@***.***> wrote: > No, actually, it is the opposite: implementing an SXLITE chip into...
hello did u use a 10 ~ 50 ohm for the dat0 when using the core? On Tue, Jan 18, 2022, 00:16 lrz ***@***.***> wrote: > hi, been following the...
Please try to use the UL10064 wires, 36AWG
Most of the time it is doe to the dat0 losing connection.. Please check it again On Tue, May 17, 2022, 09:06 smashthony ***@***.***> wrote: > Hi I just finished...
Better wait for my upcoming short video today. On Tue, May 17, 2022, 09:40 smashthony ***@***.***> wrote: > How do I fix that I need help please > > —...
Today means in several hours upto 12 hours. It's 9.45 am here. I mean time u need to check the soldering points diode values. Just like I did in the...
Rst 0 is ok.. Dat0 (C) should not be 0. On Tue, May 17, 2022, 09:47 smashthony ***@***.***> wrote: > Also the RST point shows 0 on my multimeter >...
That is causing the issue. Maybe the resistor of that A point is damaged. Please check that On Tue, May 17, 2022, 10:23 smashthony ***@***.***> wrote: > Just checked all...
The resistor should be 4.7k ohm..remove the chip wires (3.3v, rst, and gnd), and see if you can boot ur console normally On Tue, May 17, 2022, 10:26 smashthony ***@***.***>...