Stefan Carlsson

# Problem/Motivation It is a mixup between Farenheit and Celsius. When I program the unit to default Celsius from Farenhheit. (Mem pos 16) This give the problem that it still...

### Description of the issue The addon shows 200% of remaining battery level on the Onesti Products AS easyCodeTouch_v1 ### Addon version 1.35.2-1 ### Platform Core 2024.1.6 Supervisor 2024.01.1 Operating...

Onesti Products AS, EasyAccess doorlock , battery report

8

### What happened? After last update , the battery level was correctly changed from 200% to 100%, but it is stucked there, even if the doorlock warns of low battery.......

Tried a linux elf ...

6

Great program ... But when i load an Linux elf file, the sections shows garbage .... Shall be noted that I'm a Windows guy so my knowledge on linux structures...

After upgrades of the HA, Plejd addon doesnt work ... the only way to make work is a total power cycle, Then the Plejd addon works for another couple of...

Onesti Products AS easyCodeTouch_v1 doesnt show correct battery status

7

### What happened? When the batteries are "empty" , eq. 20% left ... the doorlock battery (batteryPercentageRemaining) stills shows 100%... Today my lock blinked red, signaling urgent battery change. Is...

The device SPR-01 is not showing in the addon, Log: 2024-12-13 10:06:03 WRN [device-registry] Trying to set state for null which is not in the list of known outputs. 2024-12-13...

Hi ! As a newbie on platformio I have problems to make a upload eg. flash directly from the IDE, therefor I have to flash from scratch via another tool....