steeley
steeley
despite having a wigle account that works, the browser throws an error even though I have put my login in the file as stated. btowser shows this error: WigleAuthenticationError at...
using the ACM example on an Espressif ESP32-s3 dev kit. Arduino 1.8.19. Library version = 2.00 Example compiles fine and uploads ok. Plug in any USB device (powered locally as...
Compiling MIDI example for DOIT ESP32 devkit1 just produces this error: `Documents/Arduino/libraries/EspTinyUSB/src/esptinyusb.cpp:2:25: fatal error: hal/usb_hal.h: No such file or directory`
OF 0.10.1, RPI 3, Raspbian Stretch. Non-gui examples button and relay seem ok. When you try to use any GPIO code with an OF windowed application., you get the above...
I have been testing a single channel version of this card. used this driver: https://github.com/awesometic/realtek-r8125-dkms card seems to work but seems to cause issues with the onboard cm4 wifi. I'm...
Really would like to use this chip (M5 stamp c3) will it be supported? Hopefully this plugin is still in development....
Using OF 0.11.2 on OSX Big Sur if I patch a VAoscillator it works ok. `osc.out_sine() >> engine.audio_out(1); ` if I have a WhiteNoise object called wNoise and do this...
I've looked at the documentation but I cannot understand how 'switch' works. There appears to be no method for setting a switch to a particular "position".
using the example_basics1_patching on osx with OF 0.11.2. The pitch numbers don't appear to make any sense. Trying to set the frequency of an oscillator. `100.0f >> osc.in_pitch();` gives 2.62kHz...
I'm using this library with a 4351b, 27Mhz Xtal and it seems to work well. However I would like to see what LOS and REVID actually mean. in my case...