Conor Duffy
Conor Duffy
I'm having the same issue with the 2-piece PCB, has anyone else found a fix for this? Picture of the front portion is attached below. LEDS come on when the...
Took a screen capture of what I'm talking about: https://www.youtube.com/watch?v=zQQ-1460x_M
It's currently running directly off the Pi's USB ports, I have the webcam and my 3d printer board plugged in. Don't suppose you know of any way for me to...
Found a way to check, seems to be requesting the std 500mA from the USB port, which the Pi should be well fit to handle? ```sudo lsusb -v|egrep "^Bus|MaxPower" can't...
Try the below, that got 5160's working for me over SPI: ``` [tmc5160 stepper_x] cs_pin: PF13 # spi_bus: spi1 spi_software_sclk_pin: PA5 spi_software_mosi_pin: PA7 spi_software_miso_pin: PA6 ```
> Also having this issue. It seems the problem is the `/dev/serial/` directory doesn't exist. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1035094
I'm also having a similar issue, the below image might help see what's wrong (logs are from a U6-LR)  Format seems to be "hostname mac,fw: source: [timestamp] data"
Adding to the info. Voron 2.4R2 350mm running StealthBurner, CW2 and Tap R8 (with 4 magnets). > Auto TAP Results on R8 using 'rev hop' method > Samples: 3, Total...
Just to add, I have had similar. Whats happening on my system is the CAN toolhead board is disconnecting due to the main CPU being busy starting processing the csvs...
A longer dwell time could be perfect, just to give it enough time for the toolhead board to report it's completed it's operations before the intesive data crunch begings. I'd...