Glenn
Glenn
Do you have Portus working? I tried the official image and it doesn't work. What are you using? Thanks. Glenn.
Does anyone know what the make and part number for the transformers on the controller board?
Using Ubuntu 20.04.06LTS. Created python venv. Ran sudo pip install "pyats[full]" Get these three errors: Successfully built backports.ssl pyftpdlib tftpy ncclient ERROR: aiohttp-swagger 1.0.16 has requirement jinja2>=2.11.2, but you'll have...
I'm about to try this. I do have a little experience with the DS18B20s. Have had them running for several years. Did you get your running codejoy? I'm still new...
One more thing. The 4.7K resistor is REALLY important. Make sure you have it close to your raspberry pi.
I have found an error in this code that I think is causing some issues for people. NOTE the following: 'modprobe w1_gpio' 'modprobe w1_therm' is what needs to be used...
I sent a note to support and never received a fix. Good luck.... Let me know if you are successful.
Thanks for this. I will give it a try.
Just to update the issues register. I did send an email. I am using everything as default. I followed the getting started instructions in the wiki. I am using the...
Did you ever get this working?