stachdude

Hi @JustinAzoff thanks for the reply, below output from perf ``` PerfTop: 198 irqs/sec kernel:73.2% exact: 100.0% lost: 0/0 drop: 0/0 [199Hz cycles], (all, CPU: 10) ------------------------------------------------------------------------------- 57.64% [kernel] [k]...

So just out of curiosity i've set `nohz=off` and the result: ``` PerfTop: 175 irqs/sec kernel:49.1% exact: 100.0% lost: 0/0 drop: 0/0 [199Hz cycles], (all, CPU: 10) ------------------------------------------------------------------------------- 19.17% [kernel]...

> What does > > ``` > perf top -F199 -C 10 > ``` > > show? > > The extra load is all `system` time. Could be related to...

@awelzel Im sorry, but due too some urgent project, I had to postponed upgrade work. Now that I can finally spend some time with it again, I will be able...

@lu-zero thanks for working on this, been struggling with that for a while now.

Hi, a quick update to my report. My initial observation that the problems are *always* alternating seems to be incorrect. Based on the newest logs, it looks like the `Control...

Thank you @sergeantd83, and yes it seems to be doing it's job, I do see in emsesp logs commands being accepted with no errors ### emsesp logs ``` 2025-11-11T13:25:47.001 I...

@sergeantd83 thanks, will look into this, but this will probably only cover DHW missing, not the main issue, which at this point Im not sure what to think about, as...

@sergeantd83 Yes, I agree, that's my understanding as well, and it is a correct value. ~~I've done some more debugging, and the **DHW issue** seems to be specific to my...

Same on LTS zeek version 6.0.4