srs4511351

I also use SDR++ on a Raspberry Pi. I do have occasional problems with SDR++ loading the SDRplay device. It is necessary to restart the device to get it working...

Sometimes this will help: sudo systemctl stop sdrplay sudo systemctl start sdrplay It it is too messed up, you may need to restart. I rarely have to power off or...

Debian Bullseye still has GNU Radio 3.8, but software is starting to require 3.9. The end is in sight. I have managed to get GNU Radio 3.9 installed on my...

I am using Debian Bullseye on my Raspberry Pi. For me, there is no hurry. I may have to boot on the GNU Radio 3.9 system for special needs. So...

What I did to be careful was to build a system with GNU Radio 3.9 on a different boot drive. It works very well so far. It took Debian 2...

I have 2 versions of QT installed, the original Qt version 5.11.3 for Desktop that is in the Raspberry Pi OS packager and Qt version 5.14.2 for Desktop that I...

Thanks. I just need to know how to install everything. Making it simpler would have 12 hours of compiling QT and the potential errors. Every step of the way was...

Any guidance is appreciated. Let me know if you have any answers. Enabling me to use Qt 5.11 would be nice. I can restore my system to one from before...

I decided to try an older version of qradiolink on another installation where I did not upgrade gnuradio and QT5. I hope I did it right. Is there documentation for...

Thanks for the operation tips. I need to figure out how to install the newer version. qradiolink is interesting because I should be able to get a transmitter working with...