srbjessen

I do, or I wouldn't have asked ;-) Like I also write, it would allow to show more panels without having to scroll. Besides, Mainsail isn't the only website I...

@xcasxcursex First of all, @meteyou refers to "displays OVER 2000" not "exactly 2000". My display is 3440x1440p, which is well over 2000 wide. And secondly: a 1080p with 2000 (1920)...

@xcasxcursex Listen up snowflake. You failed at keeping my FR clear of fighting even after accepting and promising. You failed at not @ anyone in this Rant 2.0 You continue...

Also having trouble connecting to mainsail/moonraker. API-key checked several times and server url also attempted with many iterations. 127.0.0.1:7125 and 7130 actual-IP:7125 and 7130 and many other ways of writing...

Still having this issue, even with a new Pi and completely fresh setup. I know i'm doing something wrong, but i don't know what. I have tried both with and...

I have also noticed mine running a new mesh every print. I have " BED_MESH_PROFILE LOAD=default " in my start gcode. Even preloading the "old" mesh before starting, doesn't have...

Initial problem solved, turns out the original cable feeding display info and RGB from mainboard was causing interference. Having removed the cable, the flicker is gone. But the display is...

I would love the option of adding location to spool label, so you can put it back in the correct box, without first having to remember where each one came...

> I got the same thing. Because my OctoPrint is 0.18 I can't use the original. I am going back to octodash Did you get the touchscreen to work on...