Daniel Eichhorn

Add main definition, so that bower-concat knows which file to concatenate. Otherwise special setup is required. See https://github.com/sapegin/grunt-bower-concat, chapter "mainFiles"

Add software serial and HAL file for ESPGateway

10

This PR adds the ability to send the collected data over a software serial connection to another device. In addition, this PR also adds a HAL file for the ESPGateway...

Cannot flash firmware on Mac OS X

18

How can I flash firmware on the devkit from a Mac OS X? I succesfully installed the driver from here http://raysfiles.com/drivers/ch341ser_mac.zip and can talk with the ESPlorer to the AT...

Standard out/ printf not flushed

1

# Problem On Mac OS X/ Ventura the output of printf will only be displayed after the native application has finished. # How to reproduce Run the following example by...

Add support for ThingPulse Color Kit Grande

2

Please add support for the ThingPulse Color Kit Grande: https://thingpulse.com/product/esp32-wifi-color-display-kit-grande/ Characterstics: - ESP32 Wrover (8MB Flash, 8MB SPRAM) - 3.5″ 320×480 Color Display (ILI9488, TFT) with capacitive touch Interface (FT6236)...

In the docker file we use "FROM resin/rpi-raspbian" which uses the latest release of the rpi-raspbian image. This can introduce instability when the parent image has changed in the meantime....

Add ThingPulse ePulse Feather and ePulse Feather C6 board definition

5

Both boards are already on the arduino-esp32 repository: - https://github.com/espressif/arduino-esp32/blob/master/variants/thingpulse_epulse_feather/pins_arduino.h - https://github.com/espressif/arduino-esp32/blob/master/variants/thingpulse_epulse_feather_c6/pins_arduino.h Source: - https://thingpulse.com/product/epulse-feather-low-power-esp32-development-board/ - https://thingpulse.com/product/epulse-feather-low-power-esp32-c6/