spikked27

Support Info: `/home/pi/indi-allsky/misc/support_info.sh: line 62: warning: command substitution: ignored null byte in input ################################# ### indi-allsky support info ### ################################# ``` Distribution: debian Release: 12 Arch: aarch64 Bits: 64 CPUs:...

New raspberry pi and SD card, brand new minimal install of indi-allsky (no MQTT or file transfer set up) and it dropped off the network again this morning, it appears...

> It could be power related. The Pi5 is a bit more power hungry than the Pi4. It definitely requires greater than 15W (>3A @ 5v) when generating the timelapse....

[indi-allsky.txt](https://github.com/user-attachments/files/18658296/indi-allsky.txt) [syslog.txt](https://github.com/user-attachments/files/18658327/syslog.txt) [webapp-indi-allsky.txt](https://github.com/user-attachments/files/18658338/webapp-indi-allsky.txt) Log attached, the strange thing is the camera continues to capture images, it's just not connected to the network anymore, startrails and keogram are produced but the...

> [indi-allsky.txt](https://github.com/user-attachments/files/18658296/indi-allsky.txt) > > [syslog.txt](https://github.com/user-attachments/files/18658327/syslog.txt) > > [webapp-indi-allsky.txt](https://github.com/user-attachments/files/18658338/webapp-indi-allsky.txt) > > Log attached, the strange thing is the camera continues to capture images, it's just not connected to the network anymore,...

> I would not expect indi-allsky to cause significantly more load than allsky. Nothing that would cause undervoltage errors. > > It sounds to me like you are just losing...

So I went a bit crazy solving the problem, stepped up my power supply to 60V to help with voltage drop with a dedicated 60V-5V 10A buck converter for the...

> That looks like your Python install is messed up. I installed python through NerdTools on Unraid, are there any dependencies I might be missing?