soph-os

It seems to work now. I think one issue was in my project settings. With a clean show it works now while in one of my old ones the issue...

Seems also be a problem in 0.6.0. But fix is easy: - temporary image export is done with "img-**0**1.png" (By having a PDF with 100+ pages same occurs with "img-001.png")...

Hi, I saw the model_fixes, but I see still some not expected behavior. Adjusting the setpoint on the room thermostat changes only the value for the high temperature in my...

I'm using the BTH-RM. Thanks! I will investigate if I find anything related in the logs...

After some further investigations: the `trv["model"]` field does not contain the expected "BTH-RM" instead there is "Battery Model". In Z2M under the device properties is Model = "BTH-RM". In Homeassistant...

Thanks for your update. In the debug log I couldn't find any model quirks loading. I printed the trv['model'] value in the debug and it says "Battery Model". So actually...

It's getting colder outside, so I have to find a solution... Below you find my config of z2m. Is that what you were asking for? Here in the logs is...

My setup is as following: * 1x Room thermostat as temperature sensor and for setpoint changes: Type: BTH-RM. The current temperature is additionally added in a sensor-template so that the...

The workaround with additional automations for the BTH-RM would also be an option for me. How to change the setpoint of BT's temperature from the automation? My assumption for your...

Hi, I got some new insights and I have now a running solution (for now): * Sync between BT and BTH-RM. There were some firmware updates. Right now I have:...