somdats

> You are currently using nvidia software, and the data is processed by the hardware ISP. Did you try setting the wbmode property of nvarguscamerasrc to a different value? >...

Ok, Trying out the 1st one may be worthwhile Does the package have UI-based manipulation of the settings, just to see the changes? Or any example usage in your git...

Thanks! Yes, We currently have 4 Imaging sources cameras, with nvidia- Jetson boards. It would be good to try out I have a question [ slightly on a different topic...

> Can you share the kernel log (dmesg) after booting when the LED stays red? The Jetson does not boot up.

> The tiscamera package contains tcam-capture, a small UI tool to check image quality and modify all available settings. > > All software linked above is free, no need to...

> Did you install the tcamtegrasrc package as well? It provides access to raw data from mipi cameras via gstreamer. @TIS-Tim Thank you, I installed it and now it works,...

@TIS-Tim Thanks a lot again and also for a nice tool, I also installed the util package for better enhancement. From the preliminary observation, I found your tool much more...

> You can add the parameters to the pipeline, e.g. > > gst-launch-1.0 tcambin tcam-properties=tcam,ExposureAuto=Off,ExposureTime=33333 ! ... > > You can get a string of all settings (for copy+paste) from...

> Are you sure about the lens? If all settings are at their default, and the sky is blue (as I assume it really is) the trees/lawn should be green....

@TIS-Stefan Thanks for the support from you & colleagues, I am now able to tune the camera/image parameters using tcam pipeline with GStreamer. I had also mentioned to you previously...