Frank

@Milka7878 allow me to quote myself: > * Configure the panel as _two chained_ 64x32 - this could work if the panel is internally wired as a chain of 2....

@Milka7878 thanks for letting us know 👍 do you know if this fix is specific to your panel, or maybe a generic error in FOUR_SCAN_64PX_HIGH ? If you think it's...

@x-Jinx-x I agree with you that "RAM depleted" is a very unexpected reaction to enabling ethernet. It could be that the ESP32 has some other troubles due to ethernet, and...

it looks like the problem is caused by the default LED pins? Well this might get complicated. To have a solution that works for all ethernet boards, we need to...

Well, we could change the [``[env_esp32_eth]``](https://github.com/wled/WLED/blob/cc5b5047719668b4e36d9ba70e8cf7896c3b9471/platformio.ini#L505) build environment in platformio.ini, to disable and remove all the features i've listed above. this can be done without any extra coding. A few...

> assigning a default pin and just leaving the field empty for the user to input it like on 14.4. My concern is that, while this would be good for...

don't think too much about the numbers - it was meant with a "smile". The book was "The Hitchhiker's Guide to the Galaxy" 😇 The main reason for the problematic...

> I'm thinking things would only break if the user turned AR on for that to happen though?¿? yes - but AR (and all other usermods) reserve their PINs at...

> Unfortunately I have been trying to implement an AI version @slopingoff its OK if you get help from an AI. However for merging your work, we expect that you...

@TMKvamme the first thing you could check is the two pins you entered in LED settings. You led pins should never overlap with ethernet pins, otherwise ethernet will not work....