smolbun

@slater0013 May I know what are you trying to accomplish? I manage to get the module to replay signals captured from an RF remote, is this what you're attempting as...

Are you building one from scratch? Or is it an existing powerpoint remote that you're using?

You could take a look at the [example for tx and rx](https://github.com/LSatan/SmartRC-CC1101-Driver-Lib/tree/master/examples/CC1101%20default%20examples/New_Method_without_GDO) and set the pins accordingly for your ESP32. ` ELECHOUSE_cc1101.setSpiPin(SCK_PIN, MISO_PIN, MOSI_PIN, SS_PIN);` this should be called before...

Apparently the first byte is the number of bytes of the packet, earlier the output from URH wasn't reliable.. I had to switch to a better SDR to get a...

Yeah its not receiving at all, no matter how long I press it. I was thinking if it could be dynamically calculated instead, like by taking the maximum or the...

Ah yeah make sense, currently I'm recording at as raw then decoding it if I need to analyze the transmission. Would it then be possible to introduce an optional parameter...

I'm confused with your response, the captured transmission is from my fan remote. I'm looking for a more efficient way to store the decoded transmission with a custom pause timing...

It works, I got `Guard_time: 37`. Thanks for the implementation, you may close this now.

Hi thank you for taking the time to reply, I ended up soldering the swd pins to my st-link and got ATCwatch flashed instead. Not exactly sure what's the difference...

Oh I didn't know that the bootloader is different for every firmware, if I understood correctly that means the bootloader is in the same .bin / .hex as the Espruino...