Nick Sorensen comments

Results 4 comments of


                                            Nick Sorensen

HAL_Delay() causes infinite loop because systick not incrementing on stm32F4 and stm32L4 and stm32G4 boards due to bugs in system_stm32f4xx.c / system_stm32l4xx.c when making new default project running from flash

Issue persistent with STM32G491RET6, STM32CubeIDE 1.11.0, STM32Cube FW_G4 V1.5.2. Wasted my time checking my board design/soldering because a blank project with a blink and delay was broken.

Loaded startup code for Readytosky 35A AT32

Could you generate some loaded startup test code for my specific target to try out? I have a large number of these ESCs and would like to be able to...

Loaded startup code for Readytosky 35A AT32

Thanks for posting the test code, I tried it out with no luck (same settings as posted above). Below 5-10% throttle the motor runs fine. Once you go above that...

Loaded startup code for Readytosky 35A AT32

Thanks, 32.9.9 worked well. What ended changing under the hood? Do you think loaded startup will ever become a parameter in the configuration suite? Or maybe more options for helping...