Simon Bunn

I followed all the steps including cutting and pasting inito the daemon.json file. I have accepted the software updates prompted by Ubuntu 22.04 on my Jetson Orin Nano. Attached is...

Is it the "failed to register bridge" that is the issue?

So never use apt-get update or apt-get upgrade, nor accept Software Updates? I tried the ```sudo apt reinstall docker-ce``` suggested by the link you sent but at the end I...

The only thing I did that I will really miss is the long process to have OpenCV with CUDA enabled. That took quite a few steps and quite a bit...

Can I use SDK Manager on my other Ubuntu machine to just re-install from fresh or do I have to boot with the jumper installed and format the NVMe drive?

I have the jumper installed and using lsusb on my other ubuntu machine but I dont see it at all. Looks like I might have to remove the NVMe drive,...

Nowhere have I ever seen a diagram on which two pins to jumper. I followed the video on you tube https://www.youtube.com/watch?v=Ucg5Zqm9ZMk and guessed from the camera angle that they were...

My USB-C socket needed crimping a bit with needle nose pliers. Now the connection is secure and I have everything back to base. I am using Jetpack 6.0DP. This is...

> You can find links to my OpenCV+CUDA binaries here - they are tarballs of opencv deb's that get installed in the containers by [`opencv_install.sh`](https://github.com/dusty-nv/jetson-containers/blob/master/packages/opencv/opencv_install.sh) > > https://github.com/dusty-nv/jetson-containers/blob/d8992335108db11b4e003db0d4cf03cf2a1cb5b6/packages/opencv/config.py#L25 > >...

Note above where I said "Is it the "failed to register bridge" that is the issue?" Looks like this is the case according to this thread on the NVIDIA site....