Helge Jensen

The Reolink Argus ECO seem to use the BAICHUAN protocol over UDP. I have left a [pcap trace](https://drive.google.com/file/d/1mDPRvsI9CLlbgDWu8HBL0KUQ-rUApBw6/view?usp=sharing) (don't worry, the password is now changed) in google drive. It contains...

Hi @QuantumEntangledAndy. Awesome you made progress. I am having issues testing it out. I suspect it's because I was running it under podman, and the networking is restricted. While I...

Thanks for your efforts! I found an old laptop and installed ubuntu, DL your binaries. Same result: ``` hej@host3:~/Downloads/release-ubuntu-18.04$ ./neolink rtsp --config=config.toml [2021-08-16T17:22:17Z INFO neolink] Neolink 528f4d0bb70017dede691822d4e3cf482a7269e3 release [2021-08-16T17:22:22Z ERROR...

@QuantumEntangledAndy. Nice of you to put efforts into this! I am be establishing a completely external net for one of the cams. Then I should be able to join the...

@QuantumEntangledAndy @sgoldstein78 This issue seems to be fixed? I can run the current docker against my Argus ECO fine now. Well, of course: 1. PIR events + local-vid retrieval as...

I am temporarily workarounding the issue by bridging the LAN and WAN ports into br-lan and filtering the packges on VLAN. Is the above usecase not a reasonable practice?

Could this in some way be related to MTU issues? I validated that all MTU's on the *bridges* were 1500, but maybe the physical devices have different MTU?

Since nobody else has this issue, and I stopped using Metrics.net, I am closing this issue as not-planned

It seems like the issue is *not* provoked by having VLAN tagged bat interfaces. Possibly by assigning two nets to a single bat interface? (in my case I did it...

Validated that this "issue" was closed by assigning two nets to a single bat interface. It is still an issue, but only triggered with "improper" configuration