Simon Küppers

Add compression for gds generation

1

In order to use GDS3D with the remote filesystem structure over slow connections, compression (server-side) and decompression (client-side) would be nice. For this, XZ compression should be used. The start...

Feature Request: Configurable Samplerate

2

Hi everyone, I would like to get the very cool APRSdroid software running with my [All-In-One-Cable](https://github.com/skuep/AIOC) (AIOC) project. However, it supports only a samplerate of 48 kHz (and even dividers...

STM32G0 Series Workaround for BOOT0-Pin Problem

8

Hi everyone, I would like to address a very recent issue popping up at multiple places related to the BOOT0 Pin in the STM32G0 series devices. See: - https://github.com/Esoterical/voron_canbus/tree/main/can_adapter/Makerbase%20UTC%201.0 -...

New Outer outer inner wall sequence combining good overhang performance (from inner-outer) with print quality (from outer-inner)

42

There have been some recent discussions in this (old and closed) issue: https://github.com/SoftFever/OrcaSlicer/issues/468 Long story short is, that this new wall order is supposed to achieve both good print quality...

- There was one minor issue with the motor mount, where there is an unprintable overhang. Probably something a chamfer can already fix.   - In my setup (152mm...