silicongarage
silicongarage
Problem is still not fixed in latest iNav 7.1.2 VARIO shows +2 ft/sec accumulated upon landing after ~30min flying. This is what I've tried. - `inav_use_gps_no_baro = OFF` - `inav_w_z_gps_v...
Not switching to the receiver with better SNR/RQly brings the downside of Dynamic Power switching keeping both transmitter and receiver telemetry power elevated (potentially much) more than needed. Not to...
Is this the only change (rx_main.cpp) you had to revert? :
**Update:** I patched my copy of V3.4.3 with the above revert and have now flown over 1.5 hours with no problems. TX has returned to the expected low power behavior....
Fully agree that the antenna signal path selection algorithm (`Stuck antenna mode` or `Best RSSI mode`) should be an option either in the configurator.app at build time or in the...
@Bouni I have the same problem. Any single digit search (0~9) fails to show any values. OS: MacOS kicad: 9.0.3 jlcpcb-tools: 2025.04.02 (installed from plugin manager)
It's interesting because two (or more) digits with the ohms symbol work correctly
@chinakov Audacity: 3.7.1 MacOS: 14.7.1 Still see the same issue. File is exported as WAV but created as AIFF
@chinakov - It only fails if I export using a macro. If I export using the` File->Export Audio...` menu, then it exports the WAV correctly.
This is an old issue, but I just ran across. Since switch data is usually low bandwidth, what about encoding the data in a channel with a pseudo pwm serial...