Shemin A Salam

Version2.0

2

Hi there, i have been using this firmware with my nodemcu with 8x8 MAX7219 displays for sometime. I appreciate the good work as the version 1.0 has worked as i...

Hi i want to connect alexapi recording and replying leds(configured default to 24 and 25) to two other lights than led. For this i am planning to use a 2...

Visual mode Editor is changed into Yaml Mode editor in automation automatically when moving.

1

### Checklist - [X] I have updated to the latest available Home Assistant version. - [X] I have cleared the cache of my browser. - [X] I have tried a...

Hi there, how can I get the total and current layer numbers from the messages send by this plugin? Actually earlier I had retrieved the layer numbers from the statetopic...

The PTZ controls are unresponsive when combined with Vertical or Horizontal stack cards.

2

Hi there, appreciate the good work but I tried to combine this card with some of my switches using a vertical stack card. The card shows the live feed but...

Max value of current from the 100A Coil Transform at 100A circuit current.

1

Hi there, What will the current output of the closed type 0-100A type coil transformer if the current in the circuit is the max at 100A? I know the theory...

Issue after HA 22.10.1 update.

4

I get the following error in logs and the component is not loaded. ``` Logger: homeassistant.setup Source: setup.py:192 First occurred: 6:43:03 AM (2 occurrences) Last logged: 6:43:07 AM Setup failed...

Hi there, Is it possible to stop all the tasks of streaming and also its server so that I can reuse the port 80 again for ota update?

publish webpage as rtsp stream

1

Is there a way by which bstreamer can be used to stream a webpage as rtsp link?

Change color according to numeric state

3

Is it possible to change color according to numeric state like in the case of a battery voltage? If above 3.2 volt green, between 2.9 and 3.2 yellow. Below 2.9...