Serg

Thanks for support, so it won't work , the new drivers no chance to be developed?

Yah... - Unfortunately I have no skills in drivers building) Could you point me out on similar driver source code? No, unfortunately there is no chance to get driver out...

Photo of the both board sides and old (original firmware)   [HI316CV200+AR0237_old_firmware.zip](https://github.com/OpenIPC/firmware/files/10716768/HI316CV200%2BAR0237_old_firmware.zip)

Thanks for explanation , unfortunately that board seems to be not for OpenIpc) . Btw, I've got several XM's firmware for such configs. I wonder if I could check the...

Thanks! If I understand you right way - I can take the driver libsns_ar0230.so from here ../general/package/hisilicon-osdrv-hi3516cv200/files/sensor/ rename ini file and change the path and name inside for the new...

> try with 0230 + init from stock fw Confused ..... What you suppose me to do with your post? There is no options for choosing ar0230 sensor for HI3516cv200...

Thanks . The driver seems to be fine for system: hisilicon: Loading of kernel modules and initialization of the video system has started mmz_start: 0x82000000, mmz_size: 96M hisilicon: Get data...

bootdelay=1 baudrate=115200 ethaddr=00:00:23:34:45:66 gatewayip=192.168.1.1 netmask=255.255.255.0 bootfile="uImage" baseaddr=0x82000000 uknor8m=mw.b ${baseaddr} ff 1000000; tftpboot ${baseaddr} uImage.${soc} && sf pr obe 0; sf erase 0x50000 0x200000; sf write ${baseaddr} 0x50000 ${filesize} uknor16m=mw.b ${baseaddr}...

Ok, guys, anyway thanks for trying to help! ipctool shows the same config - that is surprisingly for me - Ar0237 sits on I2C bus : chip: vendor: HiSilicon model:...

I tried as you said - doesn't bring a success .. but what about input mode in ini ? Shall I set as INPUT_MODE_CMOS = 4 ?