Steven Emmerson
Steven Emmerson
Hi @childofthewired, The LDM was designed assuming that the DVB-S receiver would have a hard wired connection (with some layer 2 switches, possibly) to the computer running the noaaportIngester(1) program....
@johnsimcall Hang on. We're talking amongst ourselves about the best solution for you.
@johnsimcall A Novra can't have a bonded NIC. Would you please explain how one comes about and how it increases reliability when the Novra can't use one.
@johnsimcall Would it be possible to use _active-backup_ mode in the bonded interface? This would ensure redundancy, and with a sufficiently large receive buffer setting in noaaportIngester(1), should allow a...
Hi John, The Novra is connected to a switch (switch1) which in turn connects to a > pair of Juniper switches (switch2 & switch3) that are configured as a >...
`ldmsend_nws(1)` calls `forn5()`. The purpose of `ldmsend(1)` is to act as an upstream LDM. Why does `ldmsend_nws(1)` act as a downstream LDM?
Do your firewalls allow TCP connections to port 80?
@akrherz Or one could modify their scour(1) configuration-file to avoid overlapping entries.
Low priority. Can be accomplished via routing table and/or iptables.
haijiang9527, I'm sorry, but I don't understand what you are asking. I don't know of an MDM project and the LDM is open source and can be downloaded from GitHub.