Sean Tapscott

Thanks for sharing. Could be a lot of things depending on printer setup; filament out of round, sudden draft from an opened door, untuned pid values. Could you share filament...

G90 checked or unchecked? I'd also be curious what version of Marlin you're running. Again, just helping gather info so the troubleshooting can be quick and effective. On Mon, May...

Couple of information gathering questions. What's your printer model? What firmware version is it? Do you have dynamic precision turned on for Arc Welder? Hypothesis I'll bet those straight edges...

Hi Daskew78, Looks like there are instructions for changing your release channel for Octoprint in the Readme file on ArcWelder's page. https://github.com/FormerLurker/ArcWelderPlugin Sean On Tue, Mar 16, 2021 at 7:31...

No worries, we're all new at some times. FormerLurker has put together a beautiful readme page, and updates it regularly. On Tue, Mar 16, 2021 at 8:37 PM Daskew78 ***@***.***>...

They are a small help, but I hope you see my recognition of your hard work and my good intention of giving you more time. First level support, if I...

Marlin also converts arcs back into straight line segments. Most of the firmwares are currently doing that, as far as I know. The primary benefits of arcs are more user-readable...

All the firmware issues that I've seen are where the users are told to compile a certain branch, they don't, and then they complain that the firmware fix didn't work....

Hello there, what is your firmware version amd printer model? On Sun, Apr 11, 2021, 12:29 PM mytechguyri ***@***.***> wrote: > About 8 hours into a 16 hour print today,...

I have the exact same setup. Need to recompile from the marlin bugfix branch. I would send you mine, but I have a 4.2.2 board, so it wouldn't help, and...