Stewart Russell

as noted [here](https://www.reddit.com/r/cpm/comments/89ue89/cowgol_05_an_almostselfhosting_adalike_compiler/dxfan6g/): after modifying compile.sub to run from e: and f:, all I get is: E>submit compile E>dir | CPM .ARC | ACEYDUCY.BAS | BLACKJCK.BAS | LEM .BAS |...

Export canvas as SVG?

7

SVG Crowbar doesn't seem able to export the canvas as SVG, so an export option would be welcome as an enhancement

First reported here: [Pico W ENOMEM error when using PIO - Raspberry Pi Forums](https://forums.raspberrypi.com/viewtopic.php?t=338158). A program that uses PIO (such as the example code: [micropython/pio_1hz.py at master · micropython/micropython](https://github.com/micropython/micropython/blob/master/examples/rp2/pio_1hz.py)) can't...

Richard Russell notes here — https://stardot.org.uk/forums/viewtopic.php?f=2&t=19819&start=30#p276764 — that the version 2 benchmark included here might not be ideal for running on anything but real 6502s, and provides updated code

No Pen Lift in Z0 .. Z5 range

14

Following instructions in [Pen Servo Setup](https://github.com/bdring/midTbot_esp32/wiki/Setting-Up-the-Motors#pen-servo-setup), servos (both MG90 and SG90 tried) do not respond to `G0Z0` or `G0Z5`. `G0Z-180` results in a slow, juddering movement in the servo from...

In [Setting Up the Motors](https://github.com/bdring/midTbot_esp32/wiki/Setting-Up-the-Motors) - [Pen Servo Setup](https://github.com/bdring/midTbot_esp32/wiki/Setting-Up-the-Motors#pen-servo-setup) - [Test the Motion](https://github.com/bdring/midTbot_esp32/wiki/Setting-Up-the-Motors#test-the-motion), it says: > … Not all servos travel the same way. If yours is going the wrong...

No build for Linux x86_64

5

### Description Robopaint will not run on 64 bit systems as the binaries are all 32 bit. #### Steps to reproduce OR Feature idea (Delete one) 1. extract the archive...

Does not function with Raspbian Stretch

1

EEPROM doesn't seem to be loading kernel drivers.

fails on Ubuntu 21.04 - "GtkSocket: only works under X11" (Wayland)

2

latest build from github: b-em (b-em:20995): Gtk-WARNING **: 23:54:11.128: GtkSocket: only works under X11 (b-em:20995): Gdk-WARNING **: 23:54:11.129: ../../../../../gdk/x11/gdkwindow-x11.c:5650 drawable is not a native X11 window Segmentation fault (core dumped)...

there already is a bas-2.5 from Michael Haardt

10

Michael has been quietly maintaining bas-2.5: www.moria.de/~michael/bas/bas-2.5.tar.gz Last change was late 2018. When I last spoke with him (2014?) he fixed some fairly serious floating point bugs, but didn't have...