schrej-zz

Hi, may I suggest to redesign the MQTT tab a little. There are too much redundant informations on this tab. Instead of showing the full Command-/Stat-/Tele topics, it is sufficient,...

Sorry, but I was not able to figure out, if these thermostats (with the WeBack-App) are supported by this firmware. Thanks Joerg

When adding a channel by CODE tab, I can enter a description for the channel. e.g. - id: WAllChargePoints channelTypeUID: mqtt:number label: Leistung Ladepunkte **description: Leistung aller Ladepunkte zusammen** configuration:...

If you try to edit and save parameters of a disabled thing, you get no error message. But when you try to go back, you are asked to save the...

Shelly Blu Door/Window Sensor

3

Hi, do you see a Chance to Support the new Shelly Blu D/W sensor? [https://shellyparts.de/products/shelly-blu-door-window](https://shellyparts.de/products/shelly-blu-door-window)

Service permanently exiting with zigbee2mqtt.service: Got notification message from PID 5070, but reception only permitted for main PID 5058

1

### What happened? I entered the zigbee2mqtt.service file as suggested. I the started the service via systemctl start zigbee2mqtt.service. After about 30 seconds the service stops (restarts) with the error...