satdx62

Hi, Unfortunately, it is not possible to record DRM-protected content from the internal LG apps and use it in Hyperion. You do not need a splitter as the HDMI interfaces...

> ### PicCap related issues only > > * [x] I belive that my question is related to the PicCap UI and not to the [video capture backend](https://github.com/webosbrew/hyperion-webos)[x] I have...

@snipercat69 Oh! webOS 2.x, lm14a this will not work with the PicCap UI. You need to install hyperion-webos on your LG and configure the config.json yourself. See: https://github.com/webosbrew/hyperion-webos I'm unfortunately...

@snipercat69 Hi, I would first test without Quirks and without UI capture. I would not set an FPS limit (FPS = 0) and set the resolution to 192 x 108...

@snipercat69 Hi, the config.json can be used as it is, because “127.0.0.1” is already the internal address of your TV. When you log on to your device via Terminal/SSH, you...

Either Hyperion.NG or HyperHDR can be installed and the daemon started. You must then add at least one LED controller via the IP address of your TV:8090 and create and...

It is also very important that the root status has been confirmed via the homebrew channel app settings menu and that failsafe mode is not activated after the restart. Otherwise,...

@snipercat69 What now? You are getting things mixed up here. The Hyperion log is a Windows version that you have installed on your PC. It is therefore not Hyperion.NG or...

@snipercat69 Okay, open the Homebrew Channel app on your TV and go to Settings. If Failsafe is on, set it to Off. Then open the HyperHDR Loader app on the...

> The issue I always had with hyperHDR is that the start button is always disabled. The only button enabled is the autostart and thats it TY Could you send...