saket424

@pedroSG94 and @jdonzallaz , were you using the dockerized deployment which seems to only map the two tcp ports or were you testing without Docker? I too can reproduce this...

@mitchross I have a similar experience as you do with the M.2 dual TPU. Only one is visible, but better than 0. Anyone have any ideas/workarounds to expose both TPUs?...

@mitchross Here is another person with similar results as us https://community.home-assistant.io/t/local-realtime-person-detection-for-rtsp-cameras/103107/2241 https://community.home-assistant.io/t/local-realtime-person-detection-for-rtsp-cameras/103107/2243 and he used this adapter https://www.amazon.com/dp/B07SN3QYR9

@Namburger , Once it gets into the orange+green state, it doesn't matter what cable I use, it stays in that state. My goal is to get power and ethernet connectivity...

@Namburger The only way to boot again is to force it into fastboot mode and start over

@kueblert I found that if I interrupted the boot at the right time(almost towards the end of the boot sequence) via the serial console, i was able to get it...

@Namburger I mean I did not need to reflash the board. By interrupting it at the right spot, i made the green&orange turn into all green I think the real...

https://stackoverflow.com/questions/65620825/docker-does-not-run-on-coral-dev-board-mini

@Namburger i would really appreciate a kernel update so an "apt-get install containerd.io docker-ce docker-ce-cli" succeeds out of the box on this mediatek platform Thanks in advance

@Namburger I tried following the steps outlined in the stackoverflow link above but I continue to have troubles launching docker. which kernel module is missing?