sail2themoon

You're welcome, thank you very much for that fast response and fix. No reboots any more with the updated library, running fine now.

Hi, same crash for me with 2.7 - thank you very much, red-black-bonsai for telling us, that version 2.6, manually chosen in f-droid, is working fine, so it does for...

I have the same question. I have a pdm-mic, that can do up tu 80KHz. So I need at least a 160KHz sampling rate. I've run some tests here, but...

the highest sample-rate I can get to work is 88KHz. The strange thing is: 80Khz does not work: loud crackling in the recording. I've tried also 37KHz and 62KHz, just...

This is a spectrogram of the 99KHz recording clicking my fingers: https://i.postimg.cc/kMVv8N2F/Bildschirmfoto-vom-2022-12-27-21-20-49.png There is some silent hiss above frequencies humans can hear, and I don't know if that's a recording...

Hi RG, I think the mic can to that well, as seen in the datasheet. But you have to sample with 80KHz then, for picking up 40Khz waves. The pdm...

I've changed the line 283 of nrf_midi/samples/bluetooth/peripheral_midi/src/main.c to `uart = device_get_binding(DT_LABEL(DT_NODELABEL(uart0)));` same for nrf_midi/samples/bluetooth/central_midi/src/main.c compiling without errors, but I don't know if it's working, yet.

Same for me with library from Paperino source. Did someone solved this?

Hi, well it's hard-coded, but it's a one-liner :) I had the same problem with a USB mic, that can record 16 bits and 24 bits at 192KHz fine using...

sounds great! The conversion is only done with Alsa/arecord, if an input device can't handle a specific bit-rate or bit-width. This can look like the input device is actually capable...