ryancasler
ryancasler
Anytime you have that tester program, I'd love to see it. I downloaded a different program running off the MSGEQ7 and it worked perfectly. So, I'm pretty sure the problem...
I'm hoping for this as well. Was unable to stay connected to Wifi. The only way I was able to get it to work was to set the audio delay...
How did you get this to work? I am now getting the exact same error.
I had to bump the spiff size to 2M instead of 1M. That was the only way I was able to get it to upload.
Are you shifting the level of the control line from 5v to 12v or from 3.3v to 12v? Because the esp8266 uses 3.3v logic so you would have to change...
In that case, try removing the level shifter. I have never needed one for 5v strips and when I did try to use it I had a bunch of problems...
I would say you can't really remove the off button. That's kinda of important.
Static and Breath work. The issue was that after the off button is pushed nothing works. I have enabled legacy automations and it still doesn't work. So the only way...
When you flashed the sketch to your board, was the board new or did you erase all flash contents (not just the sketch) when uploading the new firmware to the...
If you are using a Wemos D1 mini, make sure that you have it set for 4M(1M spiffs). No Spiffs is the default for some reason now. With that setting,...