rush0815
rush0815
I thought if it is possible to use the iPad or Android Table as GPS source. There is an app that delivers GPS position data over IP: https://apps.apple.com/app/gps-2-ip/id408625926 What about...
I changed both the Passphrase and the Direct Pin to "00000000" but connecting to DIRECT-stratux still results in a "wrong password" message.
Gettin the same error. Rpi 4B Image: 2023-05-03-raspios-bullseye-arm64 Clean install as shown in README `mkdir ~/projects cd ~/projects git clone https://github.com/cariboulabs/cariboulite cd cariboulite ` After that, reboot. First two runs...
I got mine today. the whole installation process went very well.. only a few warning according to python and doxygen but I think as long that are warning, stuff should...
Are you sure to receive the expected signals in stratux or is it just any undefined noise? I also got some smi timeout while checking the new dump1090 dev version...
https://www.youtube.com/watch?v=YVl0995zDS4&ab_channel=cemaxecuter look at minute 12:27. This could help. I have not tested it yet
I have the same issue, too. running dump1090 with soapy support results in the same error.
Any news on that? I also don't get the pressure altitude shown on FF with my BMP280 sensor. On the Webinterface all is fine.
Btw: --gain-element TIA: does not work on a LimeSDR mini. I will set TIA to 0
Just get one from https://www.amazon.de/LILYGO-Entwicklungsboard-CH9102F-Meshtastic-Mainboards/dp/B0B454TB6S?th=1 It's much cheaper.