rtmq0227
rtmq0227
I found the most success avoiding the elephant's foot issue ruining the face of it by orienting the main stl as shown (text facing up) but it does require supports...
I added a "simple" STL package for if the fiddly bits are too much for a filament printer. I also added some better pics to showcase the final build better
I'll admit I ran my tolerances a bit tight, I'm printing on a Photon Mono X. I can adjust the "simple" version to add a little more room for the...
Gladly! I'll update the simple files with the expanded nut holes tonight
Okay, I've added a v1.1 for the simple backplate with larger holes for the nuts, and here's an orientation guide (since Fusion always seems to export in the wrong orientation...
no, there should be all three. I removed the old version so now there's only three STL files in each version's folder
> Really nice looking case! would it be an idea to also make a top plate for the 128x32 screen? @rtmq0227 I wasn't going to, as there's already an enclosure...
@Tz1rf sorry for the delay in responding! I use it between the middle layer and the PCB to take up the gap/tolerance and keep it from rattling around. A small...
@pettard So I actually did recently put one together, but the current STL has a second hole for a NeoPixel because I was trying to create a custom build with...
@Tz1rf here's that image I promised: 