Regis Thedin
Regis Thedin
@andrew-platt FYI
There is actually no issues with either the CMake or the Eagle environment. Andy helped me with some issues I ran into while compiling it and he suggested I submit...
Lawrence, I've run into similar issues in the past and maybe our issues are related. My issue was with the bottom solver, meaning my smallest problem for the multigrid solver...
I've successfully run some cases using 100 actuator points and epsilon of 3.125 on a 1.25 m near-actuator grid. I checked the actuator force field with Tony yesterday for these...
I'm getting more power on the stable case, which has lower turbulence and you could argue is the closest to the uniform inflow. Here are the power values I'm getting:...
The choice of variable names is unfortunate here. The variables `n{X,Y,Z}_High` as you pasted above are the number of cells in each direction for the high-resolution boxes. That is not...
I don't have access-- can you add me?
That's correct. There are two issues. For 1, in my typical use case, there is no moving grids. Right now, the statistics are defined at all the different z values...
Here it is. This run takes about half of the `offsets` in the list above. I also added the tiny profiler and can share the results if useful. ``` Pinned...
Just realized that a `memlog` was created ``` Final Memory Profile Report Across Processes: | Name | Current | High Water Mark | |-----------------+--------------------+--------------------| | Fab | 0 ... 0...