Randall Reichenbach

Workin' on it. The new RP1 GPIO management screws up a few things (SPI and PWM specifically). No more RPi.GPIO. I've been converting pi-Stomp code to use gpiozero instead which...

Your question about TouchOSC inspired me to create a tutorial on how to set it up: https://www.treefallsound.com/wiki/doku.php?id=tutorials_and_videos#using_touchosc Hotspot mode is documented (maybe not greatly) here: https://www.treefallsound.com/wiki/doku.php?id=pi-stomp_core#mod_web_ui_for_pedalboard_editing Yes, Hotspot mode allows...

Yes. Program Change messages coming into the MIDI port should change the pedalboard active in MOD. The bad news is that the pi-Stomp software (separate from MOD) doesn't currently listen...

pi-stomp specific software doesn't log messages coming in, only the messages it generates. You could likely use a midi utility like amidi with the dump option, but that doesn't seem...

If you mean, how to get bookworm/pi5 to work with v2 hardware, you can do this for now: Start with bookworm 64-bit lite ``` sudo apt install -y git git...

There is no MIDI message sent when the pedalboard is changed via MOD UI. And the communication between pi-stomp software and mod-ui/mod-host has been unidirectional via the rest API defined...

Looks like it's having a problem controlling the GPIO's for the LED pins. Not sure if it's a problem with the LED module for gpiozero or the way we're using...

Yeah, good point about model/IR selection, Maarten. And yes, thanks Ken for your help! Those parameters are different than what we currently support for editing via the LCD. They are...

Wow, cool plugin. Thanks for sharing that. Will need to add that to our defaults. The models that I see available in the TooB ML Amplifier plugin (BluesJr, BossDistortionDS1, etc.)...

We might need some more info. So your um-1 or mio is connected to the pi USB, and the DIN output of that cable is attached to a synth module...