Romolo Manfredini

I had a similar problem on a SIM7600E before forcing time syncronization with network by issueing a AT+CTZU=1 command. Since my modem is syncronized with the network I haven't ever...

Are you sure that the pins defined for dscKeyBus Library are not conflicting with the pins used by the modem ?

@corvin78 Basically you have to define a switch device and set it's state depending on the remote control code received. have a look to the setstate() method switch object.

I'm really sorry for heltec, I tried before with a lot of satisfaction their cubecell series product, well documented and working flawlessy, I cannot really understand why they choose to...

Same on esp32 binary sensor is not discovered but is published on MQTT... (checking with MQTT explorer)

With version 2.1.0 everything is fine on HA 2024.5.4, but still persist the issue of multiple devices of the same type in the network, so I had to use the...

While trying to compile i get the following error src/graphicalquerybuilder.h:62:36: error: 'ActionId' has not been declared 62 | QAction *getAction(ActionId act_id) const override; What I'm missing ?

The same problem exists also on esp32. setValue on a HASensorNumber object causes crashes. Decoding stack results 0x4008aaf6: strlen at /builds/idf/crosstool-NG/.build/HOST-i686-w64-mingw32/xtensa-esp-elf/src/newlib/newlib/libc/machine/xtensa\strlen.S:82 0x400e35a7: is in HASerializer::calculateDataTopicLength(char const*, __FlashStringHelper const*) (\Arduino\libraries\home-assistant-integration\src\HADevice.h:48). 0x400e2fef:...

It doesn't work even setting the uniqueId. I did it in setup even declaring mac as static but it get not set. Only if i declare device initialising it with...

Hi pascallanger, related to the question of Giampiero is it possible by some config parameter to get telemetry, while using PPM input, always in FrSky-X protocol even if not using...