romanetz
romanetz
Hi @lapnd ! Please check whether connection speed is 1000 or 100 megabits over switch and directly. In my case that was the reason. The liteeth in my setup didn't...
Daisy chaining has one very attrcative perspective: ethercat bus slave
Please clarify exactly what does not work. From our conversation in a local telegram group I assume that you cannot set maximum velocity over than that produces specified output frequency...
As a first step, I added i9 board into litexcnc python sources and built a new firmware for the board. Some changes in configurations were done: I changed pin names...
The board is documented here: https://github.com/wuxx/Colorlight-FPGA-Projects
I added access to flash chip via SPI interface and etherbone, it was rather straightforward. Need more time to implement flash update over etherbone network. вт, 1 июл. 2025 г.,...
The main reason of such approach is maintaining consistency of located variables during PLC scan