roel-v
roel-v
Emura unit with 'Wi-Fi Online Controller Daikin BRP069A41' controller unit. I'm getting it on /aircon/get_control_info /common/basic_info /aircon/get_model_info So I guess all others are the same, too. When I try the...
OK after further investigation, it seems that it works when you use the IP address in the URL, but not when you use a hostname (this used to work). I...
Try sending a complete, valid HTTP 1.1 request, i.e. with a Host header etc.
Is anyone still interested in / working on this issue? I have a working vcpkg setup on my local machine, but that needed some changes to CMakeLists.txt, as well as...
OK, I will then make my own fork to work in, since I worked off master instead of this branch (I didn't know of this branch existed when I started...),...
OK so I've created a fork @ https://github.com/roel-v/openscad/tree/vcpkg-build . Shall I open a new issue there or here to discuss? And what would a suitable place to add some notes...
Any chance this can be picked up again? I too find the default navigation behavior a lot more difficult to use than the way it works in Blender. I wanted...
On Windows, it's really hard to get pygraphviz to work. I very much prefer a lightweight tool that only outputs a Graphviz dotfile and then lets me run the Graphviz...
OK fair enough. The reason for a vim mode is to move cq-editor more in the direction of a full-fledged IDE. I use Openscad's gui now in the way you...
Yes I looked at that, but that's not as straight forward as it looked at first, either. And I'm not keen on taking on a whole project to maintain by...