robvoi
robvoi
Thanks for the feedback. I have a RP-Lidar. So this point is set. Two more questions: 1. May it be possible to run the python SLAM with a lower update...
Thanks for the feedback. I now record and submit half a frame (the front 180 degree) for my robot. The code can be found here: http://pastebin.com/wQbmNXbu Nothing special but maybe...
I record a whole frame (angle rounded to full angle; limited to 180 degree scan in this example). Here the code: http://pastebin.com/nRz0TChH I get around 3Hz only with this. Any...
Thanks a lot! I'll give this a try. On 26 February 2015 at 02:14, Tong Wang [email protected] wrote: > I use RaspberryPi and Python to record data from RPLidar, here...
Hi. Same issue here. ``` 2024-01-11T11:39:18.041Z Install : node-red-contrib-whatsapp-link 0.1.39-C 2024-01-11T11:39:18.092Z npm install --no-audit --no-update-notifier --no-fund --save --save-prefix=~ --production --engine-strict [email protected] 2024-01-11T11:39:18.511Z [err] npm 2024-01-11T11:39:18.512Z [err] WARN config production Use...
From my testing yesterday, both solutions perform similar in regards to results. rf2o uses 9% less CPU. Still only basic testing done. No real mapping runs or anything. I’ll update...
It indeed seems to have saved some % of CPU. Didn't know this argument exists. Learned something. Thanks. I am recompiling all other nodes now. :-)
Gave up as I had other projects to advance.
Pumping :-) An outlook would be great.
I run into the same error. Filled the missing environment variables. But the error persists. Is there any update on this issue?