Marco Robustini
Marco Robustini
When i try to change branch from 1.1.x to 2.0 bug-fix i've a lot of error, i don't want to commit anything, i'm not a Marlin developer, i want just...
Where is the marlin-conf cfg file? I want to erase all the customized directory list and start clean...
I mean "how to erase the custom directory list" from the configurator. I've two custom directory but only one good... 
@bigtreetech it would be useful if you could release the bootloader sources, thanks. It would be interesting to be able to do something like this: https://github.com/Arksine/LPC17xx-DFU-Bootloader
I'm Marcopter. My enviroment: - Firmware: V3.0.0 RC1 - TX hardware: FrSky R9M - RX hardware: FrSky R9 Mini - Handset model: Horus X10s Espress with the latest official OpenTX...
I already had another block of the rx on the bench, almost immediate, after 20/30 seconds that I power the FC with the USB plug. I still had to turn...
> I will try the 3.0 RC1 today and do a few low level close range tests. To see if it repeats it self. Out of frustration I also ordered...
@corben9 it goes in support and clear dependencies and firmware, I tried here to compile for your rx, no problem. The antenna is essential, and in your case from what...
Just installed the V3 on BetaFPV Micro TX 900, no problem via USB. Too bad it has a fan that vibrates like a washing machine. These hardware are cheap but...
Look at this! https://youtu.be/Cp5V1GTqNBI