Alessandro Giacomel
Alessandro Giacomel
Hi, I don't know how you provide the power to the servo. You can't power the servo from the Arduino. You have to provide the power supply externally from the...
Hi, usually the 90% of the problems with the erratic servo is a power supply problem. Can you post the specs of your power supply and a picture of the...
Hi you have to use the vanilla GRBL, not this one. See https://github.com/grbl/grbl
Sorry I don't understand. The vanilla version has a feature for using the laser. https://github.com/gnea/grbl/wiki/Grbl-v1.1-Laser-Mode Or are you speaking about some else that I don't understand. My version of the...
Hi, It seems you power the servo in a correct way. Sorry, I can't help you
You can try other version of servo-GRBL: https://github.com/ufficioprogettiperduti/Scalable-Pen-Plotter https://github.com/cprezzi/grbl-servo
Hi, it isn't easy. You can refer to GRBL documentation on github. Bye. 2016-09-28 13:41 GMT+02:00 stajor81 [email protected]: > Hi! > How to change D11 to another pin? D10 or...
There are many sw for the connection between PC and Arduino. You can use the sw you prefer. The GRBL controller is only the sw I use, but it is...
I don't understand why you write here this problem. This Is the 0.9j version with the RC servo motor support. Il mar 12 ott 2021, 15:41 shivmahesh ***@***.***> ha scritto:...
This should have been a fork, but for my mistake it isn't a fork.,