rob42

See #696, also relevant to bitrate setting

great thanks. Maybe note in docs for RPi users too. I'll update soon, and confirm/close this. BTW - thx for the plugin. Working pretty well for me on an RPi3B,...

It doesnt actually output `....outer_item.0.groups names....`, it outputs the contents. I just used the ...var.... to represent the contents to avoid exposing some names. Was actually `The following group names...

Looks like I have v1.4 amazon collections Collection Version ----------------------------- ------- amazon.aws 1.4.1 ansible.netcommon 1.5.0 ansible.posix 1.2.0 ansible.utils 2.0.1 ansible.windows 1.4.0 arista.eos 1.3.0 awx.awx 17.1.0 azure.azcollection 1.4.0 check_point.mgmt 2.0.0 chocolatey.chocolatey...

Hi Phil, Get a depth sounder that can output NMEA0183, and connect it via the freeboard interface board NMEA ports. There is support for a cool depth sounder with a...

Basically any suitable paddlewheel can be connected to the log connectors. They work by hall effect or need switch , so they do vary. 2 Wires is a reed switch,...

This shows the basic operation https://www.bakesonline.com/images/MediaLibrary/PaddleWheelTest.jpg To use this on the freeboard interface you could try powering with 5V, or you need to use a resistor to limit voltage to...

And for airmar http://www.catalina320.com/article.php?story=speedotesting

The freeboardPLC code for the arduino doesnt currently have a log function, but adding it should be pretty simple. Its just a count of pulses/time to get a basic reading....

Check the baud rate that the depth sounder uses. It must match the NMEA1 baud, which is 9600bps. If the depth sounder cant be changed to 9600 you can change...