rhannink

Hallo, For the latest firmware for the Teptron move units, which version/branch of the crsmesh software do I need? The **master** or the **experimental** branch? I read somewhere that the...

Hello, The font file is in the same directory as the yaml file and I can open de ttf file on MacOS without and Problem. The font looks fine ??...

Hello, In the meantime I managed via two ways, but wondering what the "Royal" way is: - Run the m5ez demo once and set batterylevel to "on" via menu. This...

I also tried the following automation to detect the arming mode, but this does not trigger either. According to the documentation **Panel Status Code** should container an integer **1** or...

Thanks, I will install it manually ASAP and let you know. Thanks for the fast response. Gr. Remco

I manually installed the new release (0.8.2.0) and it looks like it is working ok. Both **arming_away** and **arming_home** now trigger my first automation. The second automation (**Panel Status Code**...

Hello, Just installed the latest version via HACS (8.2.3 and 8.2.4) and everything still works fine. Thanks for your great support. Gr. Remco

Ok thanks, I already looked at the code of megadesk, but this is strictly for tinyAT and i am not sure if it will compile on esp8266 or esp32. My...

Hello, I have built a LIN controller as shown in the schematic. I only use an mcp2003 e/p instead off an MCP2003B. I have the Bekant desk plugged in with...

Thank for your response, but I read everywhere that starting up with the original controller and then switch to the new controller should do the trick. I am not a...