Roger Wolff
Roger Wolff
After some issues compiling (See #12 ) ... we got a binary.... But on Ubuntu 18.04 when we issue the command to mount the device, we get no error message...
When the device is off, mchfuse produces: `2020/07/22 12:34:13 Failure searching for path : status code 503 retrieveing file metadata root at https://prod-xxxxxxxxxxxxxxxx.mycloud.com/xxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxx/sdk/v2/files/root?fields=id%2CeTag%2CparentID%2CchildCount%2CmimeType%2Cname%2Csize%2CmTime%2CcTime: unexpected status code` as the error message....
I'm still learning with pycam. My second to-be-milled object is a simple mounting plate for a stepper motor. Not something I really need now, but I might want to make...
I get: File "waterfall.py", line 102, in gain_change i = self.sdr.GAIN_VALUES.index(real_g) AttributeError: 'RtlSdr' object has no attribute 'GAIN_VALUES' when I hit a bracket to adjust the gain. Searching for the...
When hotplugging CPUs or boards, the STLINK often goes into "error" state. Not sure if it CAN be recovered, but if possible, resetting the error state would be nice. :-)
On the STM32F0, if you do a 16-bit write to the SPI_DR register, the hardware assumes you're writing 16 bits and queues those 16 bits (two "frames" if you're using...
### Do not report Prusa3D Slic3r bugs here without confirming it is a problem on a development release of Slic3r, or your issue will be closed. [Development builds of Slic3r](https://dl.slic3r.org/dev)....
When working on a project I often use "reload from disk" (A feature I requested a while back. Happy it got implemented, thanks!) Today it turns out that I had...
**Is your feature request related to a problem? Please describe.** My printer oozes a bit. No amount of retraction will fix that. :-( For the objects I'm currently printing, printing...
### Do not report Prusa3D Slic3r bugs here without confirming it is a problem on a development release of Slic3r, or your issue will be closed. [Development builds of Slic3r](https://dl.slic3r.org/dev)....