renedis
renedis
same issue as: https://github.com/boostchicken-dev/udm-utilities/issues/233 Which is closed and was "solved" which it clearly isn't. This probably has to do with using cgroupv1/cgroupv2. Wheras i gues the new podman relies on...
Any update?
**1. [Static host mapping](https://www.reddit.com/r/Ubiquiti/comments/k7tdri/udmpro_static_host_mapping/):** Create the following file File: /mnt/data/on_boot.d/10SetMyHosts.sh !/bin/sh create my custom dnsmasq file cat > /run/dnsmasq.conf.d/mine.conf
> But with 3 it's not my intention to route all dns traffic to a dns container, in my existing gateway.config.json I made nat routing for my vlans for when...
same issue here.. Uploading 14.5TB and getting the error after 3.6TB on a 250/250 line.
https://pvvx.github.io/TH-05/ https://github.com/pvvx/THB2/tree/master/bin https://github.com/pvvx/THB2/blob/master/bin/TH05_v16.bin There is already a version 1.6... But I could not get it to work.
My temps are still showing correct values on 1.12.38 Working on 2.x.x version now.
Also on firmware 2.x.x (and 1.x.x): temp1 = CPU temp2 = BRD temp3 = HDD
Makes sense.. But this way it doesn't allow you to set the i2c bus number. the Python3 script works now.. but sadly, it still does not read any values. But...
I think you've set it up wrong. Still running on HA 85.1? Since HA 88 it's setup different. Your python script is in the sensors folder: /config/custom_components/sensor/unifigateway.py But al the...