Andreas Remnehed
Andreas Remnehed
Hi, @seaside1 good to hear that your issue was solved. As already mentioned the cable for P1IB is a cross over cable. Normally a longer cable than 0.5m is not...
For kVar, It must been added recently (I havent updated my home assistant to latest). Thanks for notifying this. Unit 'var' (or reactive power) have not been available previously. Will...
I will wait to fix this issue with reactive power, as the unit available/recently added is only "var" (and should be spelled "VAr"), and not kVAr, which is the values...
Delivered in development firmware 9c2ad9a (20230922). BR, Andreas
Hi, These log entries are already in the post above, which is the reason for my comment on not fixing them until the correct and proper unit exists in home...
I actually started to do a fork and fixed the issue in HA, but then I didnt have time for a pull request and everything around that. But will have...
...and I just realized I actually put the unit kVArh in the wrong place... oh well, some day... :)
Hi, Yes, it should not be null values. What firmware are you running? and what meter? I will take a look at this issue during the weekend, sorry for the...
Yes KAM5, but what physical meter is it? A Kamstrup OMNIA?
Hi, MA304H4D is a M-Bus meter, and not P1-meter as far as I know. P1IB only works with MA304 meters that have a P1 interface. If you take a look...