Harlefox
Harlefox
I had a similar issue, the right switch was not working on arrival. Overconfident in my making skills I tried to fix it and broke the switch. That is a...
Thank you, how hard do you think it would be to desolder the switch as opposed to cutting it off?
Yeah, I ended up crushing the switch then removed it, however when I tried soldering a replacement button I had on hand the continuity check showed that there was a...
I tried testing the pads, what I believe to be the problem is that the pad that is connected to the u6 is soldered to the sheet of copper in...
Thank you for responding, the issue is the right bumper/trigger thing, What happened is in the schematic the switch is between ground and pin 6 of U6, or the controls...
